Starting generation of Calibration File 
FS version = 0009.0011.0019 
time_zero = 3344400 
Found #20 errors of type = ERROR st   -7 Antenna off-source! 
Found #4 errors of type = ERROR st   -4 Interface not set to remote. 
Found #4 errors of type = ERROR st   -6 Antenna control restored. 
Found #2 errors of type = ERROR st -823 sxcheck sup is 227.592. (should be 230.000 to 315.000) 
Found #2 errors of type = ERROR st -823 sxcheck sup is 208.051. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 200.234. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 229.057. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 202.189. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 223.195. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 209.028. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.706. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -824 sxcheck ret is 90.865. (should be 40.000 to 90.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 207.562. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 336.043. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5h -302 background Mark 5 error(s) detected - see below 
Found #1 errors of type = ERROR st -823 sxcheck sup is 215.379. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR st -823 sxcheck sup is 323.341. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device cu overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 220.752. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 214.890. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 205.608. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -825 sxcheck refrg is 0.254. (should be 0.300 to 0.800) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 224.660. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR 5k  302 There have not been two scan_name ... commands since the schedule started  use scan_check force to force check 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #1 errors of type = ERROR st -823 sxcheck sup is 222.218. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 217.821. (should be 230.000 to 315.000) 
Found #1 errors of type = ERROR st -823 sxcheck sup is 221.241. (should be 230.000 to 315.000) 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.84 max= 3.93
RX2 min= 4.70 max= 4.86
RX3 min= 204.63 max= 267.65
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= ohg112kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 72.2 122.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 71.5 ymax 127.8 
in match_chan ft1= ohg112kk.log.tsy1.ntup nt1= 12 st1= 5u tt= 1
set scale tsys1 [2] min max 72.2 122.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 60.3 ymax 120.1 
in match_chan ft1= ohg112kk.log.tsy1.ntup nt1= 18 st1= 9u tt= 1
set scale tsys1 [2] min max 72.2 122.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 24.8 ymax 55.3