Starting generation of Calibration File 
FS version = 0009.0010.0004 
time_zero = 4208400 
Found #42 errors of type = ERROR st   -4 Interface not set to remote. 
Found #8 errors of type = ERROR ch -370 Total power integrator overflow on IF3 
Found #7 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #5 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #5 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR ch   -4 Device v6 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v2 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch -308 v5 total power integrator overflow 
Found #3 errors of type = ERROR ch   -4 Device v3 timed-out on response from MATCN 
Found #3 errors of type = ERROR sp   -3 More than 12 characters in function or procedure name. 
Found #3 errors of type = ERROR ch   -4 Device vf timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device ve timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device va timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device i3 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device if timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v8 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v1 timed-out on response from MATCN 
Found #3 errors of type = ERROR st -901 Receiver LO is unlocked. 
Found #3 errors of type = ERROR ch   -4 Device vb timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v4 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v7 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v5 timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device vd timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device vc timed-out on response from MATCN 
Found #3 errors of type = ERROR ch   -4 Device v9 timed-out on response from MATCN 
Found #2 errors of type = ERROR bo -105 Error opening schedule file FMP  FFF 
Found #2 errors of type = ERROR bo -173 Disk recording was commanded  either use disk_record off or terminate disk_record_ok. 
Found #2 errors of type = ERROR st   -6 Antenna control restored. 
Found #1 errors of type = ERROR qs -202 Error specifying right ascension. 
Found #1 errors of type = ERROR m5 -900 Must have ' ' or ' ' 
Found #1 errors of type = ERROR ch -308 vb total power integrator overflow 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR m5 -903 MARK5 return code 3: syntax (or parameter error) 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these SK parameters: 00(BXFNT) 02(LO_TMP) 03(DCAL_T)
RX1 min= 16.50 max= 2010.048.17:30:11.14
RX2 min= 46.70 max= 47.40
RX3 min= 28.60 max= 33.30
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= rd1002ny.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 53.1 73.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 49.1 ymax 78.9 
in match_chan ft1= rd1002ny.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 53.1 73.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.7 ymax 77 
in match_chan ft1= rd1002ny.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 53.1 73.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 50.6 ymax 86.2