Starting generation of Calibration File 
FS version = 0009.0010.0004 
time_zero = 6451200 
Found #3101 errors of type = ERROR st -818 sxcheck 24v is 24.214. (should be 23.800 to 24.200) 
Found #258 errors of type = ERROR st -705 100 MHz Unlocked. 
Found #49 errors of type = ERROR st   -7 Antenna off-source! 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #1 errors of type = ERROR st -825 sxcheck refrg is 0.664. (should be 0.420 to 0.600) 
Found #1 errors of type = ERROR mc   -2 Interface bd responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR 5k -505 error decoding scan_check  start parameter 
Found #1 errors of type = ERROR qk -211 Tsys value for device bu overflowed or was less than zero. 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.93 max= 3.96
RX2 min= 4.88 max= 4.93
RX3 min= 251.59 max= 259.89
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1422kk.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 52.3 92.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 47.1 ymax 95.6 
in match_chan ft1= r1422kk.log.tsy1.ntup nt1= 20 st1= 5u tt= 1
set scale tsys1 [2] min max 52.3 92.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 35.6 ymax 82.8 
in match_chan ft1= r1422kk.log.tsy1.ntup nt1= 13 st1= 9u tt= 1
set scale tsys1 [2] min max 52.3 92.4
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 28.4 ymax 172.4