Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 24516000 
Found #296 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #54 errors of type = ERROR st -204 WARNING: not OK to move the antenna! No R commands will be sent.
 
Found #24 errors of type = ERROR ch -317 Total power integrator overflow on IF2 
Found #6 errors of type = ERROR qk -211 Tsys value for device i1 overflowed or was less than zero. 
Found #5 errors of type = ERROR st  -14 Antenna stuck.
 
Found #4 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  65K. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4347ft.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 65.8 162.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 62.4 ymax 176 
in match_chan ft1= r4347ft.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 65.8 162.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 55.3 ymax 152.1 
in match_chan ft1= r4347ft.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 65.8 162.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 86.3 ymax 305