Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 22791600 
Found #7 errors of type = ERROR ch -317 Total power integrator overflow on IF2 
Found #4 errors of type = ERROR ma   -4 Device ve timed-out on response. 
Found #4 errors of type = ERROR ch -308 vc total power integrator overflow 
Found #4 errors of type = ERROR ch   -4 Device ve timed-out on response from MATCN 
Found #3 errors of type = ERROR ch -309 vd alarm is on 
Found #3 errors of type = ERROR ch -304 v4 TPI selection does not check with requested setting 
Found #3 errors of type = ERROR ch -302 v8 frequency does not check with requested value 
Found #3 errors of type = ERROR ch -302 v4 frequency does not check with requested value 
Found #3 errors of type = ERROR ch -305 v8 USB attenuator does not check with requested setting 
Found #3 errors of type = ERROR ch -306 v7 LSB attenuator does not check with requested setting 
Found #3 errors of type = ERROR ch -304 v7 TPI selection does not check with requested setting 
Found #3 errors of type = ERROR ch -303 v8 bandwidth does not check with requested value 
Found #3 errors of type = ERROR ch -306 v4 LSB attenuator does not check with requested setting 
Found #3 errors of type = ERROR ch -303 v4 bandwidth does not check with requested value 
Found #3 errors of type = ERROR ch -309 v8 alarm is on 
Found #3 errors of type = ERROR ch -306 v8 LSB attenuator does not check with requested setting 
Found #3 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #3 errors of type = ERROR ch -309 v4 alarm is on 
Found #3 errors of type = ERROR ch -303 v7 bandwidth does not check with requested value 
Found #2 errors of type = ERROR q+ -302 Last commanded IF3 attenuation used as default  please modify command. 
Found #2 errors of type = ERROR ch -307 v8 unlock indicator is on 
Found #2 errors of type = ERROR ch -307 v4 unlock indicator is on 
Found #2 errors of type = ERROR qk -211 Tsys value for device vc overflowed or was less than zero. 
Found #2 errors of type = ERROR qi -302 Last commanded IFD attenuations used as default  please modify command. 
Found #1 errors of type = ERROR ch -304 vb TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -303 va bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -302 vb frequency does not check with requested value 
Found #1 errors of type = ERROR ch -306 vd LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -312 IF1 attenuator does not check with requested value 
Found #1 errors of type = ERROR ch -302 va frequency does not check with requested value 
Found #1 errors of type = ERROR ch -313 IF2 attenuator does not check with requested value 
Found #1 errors of type = ERROR ch -305 va USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device vb timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 vc USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -304 vc TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device vd timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -303 vd bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -309 v2 alarm is on 
Found #1 errors of type = ERROR ch -309 v6 alarm is on 
Found #1 errors of type = ERROR ch -365 IF3 switch 2 setting does not check with request. 
Found #1 errors of type = ERROR sc   -4 setcl: formatter to cpu time difference greater than 248 days 
Found #1 errors of type = ERROR ch -302 v3 frequency does not check with requested value 
Found #1 errors of type = ERROR ch   -4 Device v1 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 v2 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -303 v2 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch   -4 Device v3 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -309 va alarm is on 
Found #1 errors of type = ERROR ch -302 v7 frequency does not check with requested value 
Found #1 errors of type = ERROR ch -305 v4 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device rx timed-out on response from MATCN 
Found #1 errors of type = ERROR ch   -4 Device v5 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 v6 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -304 v5 TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -303 v6 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch   -4 Device v7 timed-out on response from MATCN 
Found #1 errors of type = ERROR qk -211 Tsys value for device ve overflowed or was less than zero. 
Found #1 errors of type = ERROR ch -306 va LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -306 vb LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device v9 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 v9 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device if timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -306 v3 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -304 v9 TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -306 vc LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR bo -309 Help not available for that command  maybe your equipment type is wrong. 
Found #1 errors of type = ERROR ch -371 IF3 alarm is on 
Found #1 errors of type = ERROR ch -302 vd frequency does not check with requested value 
Found #1 errors of type = ERROR ch -303 vc bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -304 vd TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device i3 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -309 v3 alarm is on 
Found #1 errors of type = ERROR ch -309 v7 alarm is on 
Found #1 errors of type = ERROR ch -306 v2 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -363 IF3 mixer state does not check with request. 
Found #1 errors of type = ERROR ch -309 v9 alarm is on 
Found #1 errors of type = ERROR ch -306 v6 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -306 v5 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -302 v2 frequency does not check with requested value 
Found #1 errors of type = ERROR ch -307 va unlock indicator is on 
Found #1 errors of type = ERROR ch -303 v1 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -302 v6 frequency does not check with requested value 
Found #1 errors of type = ERROR ch -307 vb unlock indicator is on 
Found #1 errors of type = ERROR ch -304 v2 TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -309 vb alarm is on 
Found #1 errors of type = ERROR ch -303 v5 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -304 v6 TPI selection does not check with requested setting 
Found #1 errors of type = ERROR qk -211 Tsys value for device vb overflowed or was less than zero. 
Found #1 errors of type = ERROR ch -370 Total power integrator overflow on IF3 
Found #1 errors of type = ERROR ch -303 v9 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -307 v2 unlock indicator is on 
Found #1 errors of type = ERROR ch -302 vc frequency does not check with requested value 
Found #1 errors of type = ERROR ch -307 v3 unlock indicator is on 
Found #1 errors of type = ERROR ch -306 v1 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device va timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 vb USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -304 va TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -303 vb bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch   -4 Device vc timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 vd USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -307 vc unlock indicator is on 
Found #1 errors of type = ERROR ch -307 vd unlock indicator is on 
Found #1 errors of type = ERROR ch -306 v9 LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -307 v9 unlock indicator is on 
Found #1 errors of type = ERROR ch -309 v5 alarm is on 
Found #1 errors of type = ERROR ch -362 IF3 attenuator does not check with requested value. 
Found #1 errors of type = ERROR qk -211 Tsys value for device v8 overflowed or was less than zero. 
Found #1 errors of type = ERROR ch -302 v1 frequency does not check with requested value 
Found #1 errors of type = ERROR ch -305 v1 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device v2 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -302 v5 frequency does not check with requested value 
Found #1 errors of type = ERROR ch -305 v3 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device v4 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -304 v3 TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -305 v5 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -303 v3 bandwidth does not check with requested value 
Found #1 errors of type = ERROR ch -309 vc alarm is on 
Found #1 errors of type = ERROR ch -302 v9 frequency does not check with requested value 
Found #1 errors of type = ERROR ch   -4 Device v6 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -305 v7 USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -309 v1 alarm is on 
Found #1 errors of type = ERROR ch   -4 Device v8 timed-out on response from MATCN 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 02 06 11
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4294wz.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 33.7 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 30.2 ymax 107.7 
in match_chan ft1= r4294wz.log.tsy1.ntup nt1= 20 st1= 6u tt= 1
set scale tsys1 [2] min max 33.7 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 19.7 ymax 87.1 
in match_chan ft1= r4294wz.log.tsy1.ntup nt1= 14 st1= bu tt= 1
set scale tsys1 [2] min max 33.7 95.5
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 46.3 ymax 305