Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 19159200 
Found #104 errors of type = ERROR ch -309 ve alarm is on 
Found #17 errors of type = ERROR ch -307 ve unlock indicator is on 
Found #9 errors of type = ERROR ch -317 Total power integrator overflow on IF2 
Found #6 errors of type = ERROR ch -306 ve LSB attenuator does not check with requested setting 
Found #6 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #6 errors of type = ERROR ch -304 ve TPI selection does not check with requested setting 
Found #4 errors of type = ERROR ma   -4 Device ve timed-out on response. 
Found #3 errors of type = ERROR qk -211 Tsys value for device i1 overflowed or was less than zero. 
Found #3 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  65K. 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR ch -350 The Receiver 20K stage is hotter than  40K. 
Found #1 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found #1 errors of type = ERROR st  -14 Antenna stuck.
 
Found #1 errors of type = ERROR m5 -900 Not in bank mode 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 45.23 max= 2007.221.18:52:24.98
RX2 min= 40.35 max= 41.08
RX3 min= 0.152 max= 0.154
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4288ft.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 156.0 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 143.5 ymax 305 
in match_chan ft1= r4288ft.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 156.0 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 188.7 ymax 305 
in match_chan ft1= r4288ft.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 156.0 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 66 ymax 305