Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 14922000 
Found #69 errors of type = ERROR ch -316 Total power integrator overflow on IF1 
Found #26 errors of type = ERROR qk -211 Tsys value for device i1 overflowed or was less than zero. 
Found #12 errors of type = ERROR ib -300 GPIB(edvr) unix error  see message above  RE 
Found #12 errors of type = ERROR un   12 Cannot allocate memory 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #6 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #4 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #3 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found #2 errors of type = ERROR m5 -900 Check formatter serial number even 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 40.84 max= 2007.172.18:56:46.22
RX2 min= 36.69 max= 44.50
RX3 min= 0.151 max= 0.156
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4281ft.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 201.0 249.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 177.8 ymax 246.5 
in match_chan ft1= r4281ft.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 201.0 249.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 219.8 ymax 270.2 
in match_chan ft1= r4281ft.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 201.0 249.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 92.7 ymax 115.5