Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 5587200 
Found #66 errors of type = ERROR st  -14 Antenna stuck.
 
Found #13 errors of type = ERROR an -103 Pointing computer tracking errors are too large.
 
Found #13 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING!
 
Found #11 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero.
 
Found #3 errors of type = ERROR ch -309 vb alarm is on
 
Found #2 errors of type = ERROR ch -350 The Receiver 20K stage is hotter than  40K.
 
Found #2 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  65K.
 
Found #2 errors of type = ERROR an   -7 Antenna communications restored.
 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure).
 
Found #1 errors of type = ERROR ch -348 Receiver LO is unlocked.
 
Found #1 errors of type = ERROR st -503 Az signal failure
 
Found #1 errors of type = ERROR st -514 El power supply failure
 
Found these BBCs: vc01
 vc05
 vc09
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r1266ft.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 186.7 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 175 ymax 305 
in match_chan ft1= r1266ft.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 186.7 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 195 ymax 305 
in match_chan ft1= r1266ft.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 186.7 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 70.3 ymax 119.3