Starting generation of Calibration File 
FS version = 0009.0009.0002 
time_zero = 15285600 
Found #189 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or was less than zero. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR bo -173 Disk recording was commanded  either use disk_record off or terminate disk_record_ok. 
Found #1 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found #1 errors of type = ERROR m5 -900 No scans 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= crds39hh.log.tsy1.ntup nt1= 7 st1= 1d tt= 1
set scale tsys1 [2] min max 59.7 78.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 61.8 ymax 91.6 
in match_chan ft1= crds39hh.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 59.7 78.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 47.4 ymax 74.3 
in match_chan ft1= crds39hh.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 59.7 78.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 48.1 ymax 78.2