Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 25203600 
Found #34 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #14 errors of type = ERROR ch -348 Receiver LO is unlocked. 
Found #11 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #5 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #4 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR qk -211 Tsys value for device cu overflowed or was less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device du overflowed or was less than zero. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 22.16 max= 2005.291.17:15:52.08
RX2 min= 32.66 max= 38.76
RX3 min= 32.29 max= 38.88
Plotting 3 Tsys channels: 02 06 11
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= t2040gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 50.5 179.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.8 ymax 192 
in match_chan ft1= t2040gc.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 50.5 179.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 42.6 ymax 186.3 
in match_chan ft1= t2040gc.log.tsy1.ntup nt1= 17 st1= bu tt= 1
set scale tsys1 [2] min max 50.5 179.7
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 12.3 ymax 143