Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 15609600 
Found #1752 errors of type = ERROR ma   -4 Device de timed-out on response. 
Found #438 errors of type = ERROR sp  -13 This command not supported for your equipment  check equip.ctl. 
Found #73 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #36 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #29 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #24 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #23 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #7 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR ch -233 r1 tape drive should be moving and it isn't 
Found #2 errors of type = ERROR qg -303 Track 31 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -304 Track 11 sync errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 10 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -304 Track 10 sync errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 32 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 12 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 14 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface be responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR qg -303 Track 28 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 33 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR qg -303 Track 16 parity errors exceed threshold. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 25.33 max= 37.54
RX2 min= 36.44 max= 47.92
RX3 min= 36.20 max= 47.68
Plotting 3 Tsys channels: 02 06 11
Tsysa values are:    etc
Tsysb values are:    etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1=  nt1=  st1=  tt= 
set scale tsys1 [2] min max  
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100