Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 10170000 
Found #392 errors of type = ERROR sp  -13 This command not supported for your equipment  check equip.ctl. 
Found #16 errors of type = ERROR an   -5 Error return from antenna. 
Found #14 errors of type = ERROR ma   -4 Device rx timed-out on response. 
Found #12 errors of type = ERROR ch -233 r1 tape drive should be moving and it isn't 
Found #4 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #3 errors of type = ERROR qg -303 Track 32 parity errors exceed threshold. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR ch   -4 Device rx timed-out on response from MATCN 
Found #2 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 14 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  6 parity errors exceed threshold. 
Found #1 errors of type = ERROR qn -201 Error in request. Unknown module or does not match your equipment. 
Found #1 errors of type = ERROR qg -303 Track 29 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 21 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 31 parity errors exceed threshold. 
Found #1 errors of type = ERROR sp   -3 More than 12 characters in function or procedure name. 
Found #1 errors of type = ERROR ib -402 GPIB(enol) write handshake error  CHECK instrument and cable  W1 
Found #1 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: front lo dcal
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 02 06 11
Tsysa values are:    etc
Tsysb values are:    etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1=  nt1=  st1=  tt= 
set scale tsys1 [2] min max  
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100