Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 3517200 
Found #6 errors of type = ERROR ch -233 r1 tape drive should be moving and it isn't 
Found #6 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #4 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #4 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #4 errors of type = ERROR qg -303 Track 31 parity errors exceed threshold. 
Found #3 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #2 errors of type = ERROR qg -303 Track 29 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 26 parity errors exceed threshold. 
Found #2 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #2 errors of type = ERROR qg -303 Track 30 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #1 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ia overflowed or was less than zero. 
Found #1 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  8 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  6 parity errors exceed threshold. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 22 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR qg -303 Track 23 parity errors exceed threshold. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 19.10 max= 2005.040.17:36:30.31
RX2 min= 47.55 max= 47.92
RX3 min= 47.43 max= 48.65
Plotting 3 Tsys channels: 02 06 11
Tsys values are: 3 4 -1 etc
NTSYS: 3
in match_chan ft1=  nt1=  st1=  tt= 
set scale tsys1 [2] min max 49.5 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin -5 ymax 5