Starting generation of Calibration File 
FS version = 0009.0007.0007 
time_zero = 27622800 
Found #74 errors of type = ERROR ST   -6 Antenna brakes are ON. 
Found #74 errors of type = ERROR qk -211 Tsys value for device 1u overflowed or was less than zero. 
Found #74 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #36 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #36 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #18 errors of type = ERROR qk -211 Tsys value for device 8u overflowed or was less than zero. 
Found #3 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR m5 -900 Unknown keyword 
Found #1 errors of type = ERROR m5 -907 MARK5 return code 7: no such keyword 
Found #1 errors of type = ERROR ST   -5 Antenna system problem. 
Found #1 errors of type = ERROR 5k -601 SCAN_CHECK failed 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 23.38 max= 28.88
RX2 min= 46.83 max= 47.80
RX3 min= 51.10 max= 51.71
Plotting 3 Tsys channels: 01 05 09
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= rd0509ap.log.tsy1.ntup nt1= 8 st1= 1u tt= 1
set scale tsys1 [2] min max 48.3 242.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.5 ymax 305 
in match_chan ft1= rd0509ap.log.tsy1.ntup nt1= 18 st1= 5u tt= 1
set scale tsys1 [2] min max 48.3 242.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 37.5 ymax 305 
in match_chan ft1= rd0509ap.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 48.3 242.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 64.2 ymax 95.1