Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 28231200 
Found #31 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #10 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #9 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #3 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #1 errors of type = ERROR mc   -2 Interface b6 responded  but did not ACKnowledge. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 18.62 max= 2005.326.18:22:42.43
RX2 min= 29.36 max= 32.78
RX3 min= 28.75 max= 32.41
Plotting 3 Tsys channels: 02 06 11
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4199gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 47.1 101.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.5 ymax 109.1 
in match_chan ft1= r4199gc.log.tsy1.ntup nt1= 19 st1= 6u tt= 1
set scale tsys1 [2] min max 47.1 101.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 33.2 ymax 84.2 
in match_chan ft1= r4199gc.log.tsy1.ntup nt1= 13 st1= bu tt= 1
set scale tsys1 [2] min max 47.1 101.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 55.8 ymax 117.5