Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 27208800 
Found #7 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR ch -348 Receiver LO is unlocked. 
Found #2 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #1 errors of type = ERROR qk -211 Tsys value for device ic overflowed or was less than zero. 
Found #1 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 12.63 max= 2005.314.22:06:27.69
RX2 min= 23.62 max= 26.19
RX3 min= 23.13 max= 25.82
Plotting 3 Tsys channels: 02 06 11
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4197gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 46.3 138.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 42.1 ymax 145 
in match_chan ft1= r4197gc.log.tsy1.ntup nt1= 19 st1= 6u tt= 1
set scale tsys1 [2] min max 46.3 138.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 32.6 ymax 112.4 
in match_chan ft1= r4197gc.log.tsy1.ntup nt1= 13 st1= bu tt= 1
set scale tsys1 [2] min max 46.3 138.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 23.3 ymax 164.4