Starting generation of Calibration File 
FS version = 0009.0007.0006 
time_zero = 26593200 
Found #2 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR bo -303 This error not found in TNX list  so it can't be turned 'on'. 
Found #2 errors of type = ERROR qk -211 Tsys value for device au overflowed or was less than zero. 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR mc   -2 Interface be responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR st   -7 Antenna off-source! 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.82 max= 2005.307.20:23:59.09
RX2 min= 4.72 max= 4.73
RX3 min= 263.31 max= 269.17
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4196kk.log.tsy1.ntup nt1= 7 st1= 1u tt= 1
set scale tsys1 [2] min max 32.7 80.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 34.6 ymax 105 
in match_chan ft1= r4196kk.log.tsy1.ntup nt1= 19 st1= 5u tt= 1
set scale tsys1 [2] min max 32.7 80.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 24.8 ymax 81.7 
in match_chan ft1= r4196kk.log.tsy1.ntup nt1= 12 st1= 9u tt= 1
set scale tsys1 [2] min max 32.7 80.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 38.1 ymax 88.1