Starting generation of Calibration File 
FS version = 0009.0007.0000 
time_zero = 4212000 
Found #90 errors of type = ERROR ib   -4 GPIB Device time-out on response ca 
Found #89 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #88 errors of type = ERROR ST   -6 Antenna brakes are ON. 
Found #66 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #66 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #33 errors of type = ERROR ST   -5 Antenna system problem. 
Found #2 errors of type = ERROR qk -211 Tsys value for device bu overflowed or was less than zero. 
Found #1 errors of type = ERROR mc   -2 Interface b1 responded  but did not ACKnowledge. 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 17.03 max= 23.87
RX2 min= 44.99 max= 45.97
RX3 min= 51.10 max= 51.59
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4161ap.log.tsy1.ntup nt1= 7 st1= 1u tt= 1
set scale tsys1 [2] min max 48.9 71.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.2 ymax 75.1 
in match_chan ft1= r4161ap.log.tsy1.ntup nt1= 17 st1= 5u tt= 1
set scale tsys1 [2] min max 48.9 71.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 36.4 ymax 65 
in match_chan ft1= r4161ap.log.tsy1.ntup nt1= 11 st1= 9u tt= 1
set scale tsys1 [2] min max 48.9 71.1
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 52.7 ymax 109.5