Starting generation of Calibration File 
FS version = 0009.0007.0000 
time_zero = 3607200 
Found #52 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #52 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #12 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #11 errors of type = ERROR ST   -6 Antenna brakes are ON. 
Found #10 errors of type = ERROR m5  -23 mk5cn: socket open error from getsockopt() 
Found #10 errors of type = ERROR qk -211 Tsys value for device bu overflowed or was less than zero. 
Found #10 errors of type = ERROR un  115 Operation now in progress 
Found #1 errors of type = ERROR m5 -900 Must have ' ' or ' ' 
Found #1 errors of type = ERROR m5 -903 MARK5 return code 3: syntax (or parameter error) 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR mc   -2 Interface b8 responded  but did not ACKnowledge. 
Found these BBCs: bbc01 bbc05 bbc09
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 19.96 max= 22.65
RX2 min= 45.36 max= 45.85
RX3 min= 51.22 max= 51.34
Plotting 3 Tsys channels: 01 05 09
Tsys values are: 1 2 3 etc
NTSYS: 3
in match_chan ft1= r4160ap.log.tsy1.ntup nt1= 7 st1= 1u tt= 1
set scale tsys1 [2] min max 51.7 75.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 45.8 ymax 80.6 
in match_chan ft1= r4160ap.log.tsy1.ntup nt1= 17 st1= 5u tt= 1
set scale tsys1 [2] min max 51.7 75.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 38.3 ymax 66.5 
in match_chan ft1= r4160ap.log.tsy1.ntup nt1= 11 st1= 9u tt= 1
set scale tsys1 [2] min max 51.7 75.6
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 55.4 ymax 117