Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 29952000 
Found #5 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #4 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR qk -211 Tsys value for device ic overflowed or was less than zero. 
Found #2 errors of type = ERROR m5 -104 mk5cn: time-out on mk5 device  connection closed 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR ma   -4 Device fm timed-out on response. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 14.71 max= 2005.346.16:27:52.36
RX2 min= 25.70 max= 33.27
RX3 min= 25.09 max= 33.27
Plotting 3 Tsys channels: 02 06 11
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1202gc.log.tsy1.ntup nt1= 9 st1= 2u tt= 1
set scale tsys1 [2] min max 47.2 143.3
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 42.2 ymax 148.3 
in match_chan ft1= r1202gc.log.tsy1.ntup nt1= 20 st1= 6u tt= 1
set scale tsys1 [2] min max 47.2 143.3
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 32.6 ymax 114.6 
in match_chan ft1= r1202gc.log.tsy1.ntup nt1= 14 st1= bu tt= 1
set scale tsys1 [2] min max 47.2 143.3
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 57.6 ymax 161.7