Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 25110000 
Found #53 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #17 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #13 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #10 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #2 errors of type = ERROR qk -211 Tsys value for device ic overflowed or was less than zero. 
Found #2 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR mc   -2 Interface b1 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR m5 -900 Check formatter serial number even 
Found #1 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 24.84 max= 2005.290.15:49:13.35
RX2 min= 34.86 max= 37.05
RX3 min= 34.61 max= 37.05
Plotting 3 Tsys channels: 02 06 11
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1194gc.log.tsy1.ntup nt1= 9 st1= 2u tt= 1
set scale tsys1 [2] min max 48.5 192.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.5 ymax 197.2 
in match_chan ft1= r1194gc.log.tsy1.ntup nt1= 20 st1= 6u tt= 1
set scale tsys1 [2] min max 48.5 192.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 33.1 ymax 148.6 
in match_chan ft1= r1194gc.log.tsy1.ntup nt1= 14 st1= bu tt= 1
set scale tsys1 [2] min max 48.5 192.2
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 53.6 ymax 282.1