Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 24505200 
Found #47 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #44 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #44 errors of type = ERROR an   -5 Error return from antenna. 
Found #30 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #26 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #10 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #7 errors of type = ERROR an -101 Pointing computer year  day  or time is incorrect. 
Found #5 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #4 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  80K. 
Found #4 errors of type = ERROR ch -348 Receiver LO is unlocked. 
Found #4 errors of type = ERROR ch -350 The Receiver 20K stage is hotter than  35K. 
Found #4 errors of type = ERROR m5 -904 MARK5 return code 4: error encountered (during attempt to execute) 
Found #3 errors of type = ERROR mc   -2 Interface ba responded  but did not ACKnowledge. 
Found #3 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #2 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #2 errors of type = ERROR m5 -900 Can't get device info 
Found #2 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found #2 errors of type = ERROR m5 -900 Can't get SS version 
Found #1 errors of type = ERROR m5 -900 Check formatter serial number even 
Found #1 errors of type = ERROR mc   -2 Interface ic responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR m5 -900 Previous recording still active 
Found #1 errors of type = ERROR qk -204 No detectors selected 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 9.707 max= 2005.283.15:50:33.31
RX2 min= 21.42 max= 24.96
RX3 min= 21.06 max= 24.48
Plotting 3 Tsys channels: 02 06 11
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1193gc.log.tsy1.ntup nt1= 9 st1= 2u tt= 1
set scale tsys1 [2] min max 88.2 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 83.2 ymax 305 
in match_chan ft1= r1193gc.log.tsy1.ntup nt1= 20 st1= 6u tt= 1
set scale tsys1 [2] min max 88.2 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 68.7 ymax 305 
in match_chan ft1= r1193gc.log.tsy1.ntup nt1= 14 st1= bu tt= 1
set scale tsys1 [2] min max 88.2 305
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 80.9 ymax 230.9