Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 4550400 
Found #63 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #62 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #29 errors of type = ERROR ch -350 The Receiver 20K stage is hotter than  35K. 
Found #24 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  80K. 
Found #8 errors of type = ERROR qk -211 Tsys value for device ib overflowed or was less than zero. 
Found #7 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #7 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #5 errors of type = ERROR qk -211 Tsys value for device ia overflowed or was less than zero. 
Found #1 errors of type = ERROR mc   -2 Interface b9 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= -250.0 max= 2005.052.16:30:50.92
RX2 min= -245.6 max= 48.04
RX3 min= 0.061 max= 52.32
Plotting 3 Tsys channels: 02 06 11
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= r1163gc.log.tsy1.ntup nt1= 9 st1= 2u tt= 1
set scale tsys1 [2] min max 45.6 203.8
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 40.6 ymax 208.8 
in match_chan ft1= r1163gc.log.tsy1.ntup nt1= 21 st1= 6u tt= 1
set scale tsys1 [2] min max 45.6 203.8
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 30.2 ymax 153.9 
in match_chan ft1= r1163gc.log.tsy1.ntup nt1= 15 st1= bu tt= 1
set scale tsys1 [2] min max 45.6 203.8
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 50.7 ymax 212.2