Starting generation of Calibration File 
FS version = 0009.0007.0005 
time_zero = 22867200 
Found #14 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #9 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR an -101 Pointing computer year  day  or time is incorrect. 
Found #2 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #2 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #1 errors of type = ERROR m5 -900 Check formatter serial number even 
Found #1 errors of type = ERROR qk -211 Tsys value for device ic overflowed or was less than zero. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR m5 -906 MARK5 return code 6: inconsistent or conflicting request 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 18.25 max= 2005.264.16:56:27.68
RX2 min= 28.99 max= 32.66
RX3 min= 28.38 max= 32.54
Plotting 3 Tsys channels: 02 06 11
Tsys values are: -1 1 2 etc
NTSYS: 3
in match_chan ft1= c0510gc.log.tsy1.ntup nt1= 9 st1= 2u tt= 1
set scale tsys1 [2] min max 48.5 152.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.5 ymax 157 
in match_chan ft1= c0510gc.log.tsy1.ntup nt1= 20 st1= 6u tt= 1
set scale tsys1 [2] min max 48.5 152.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 33.5 ymax 118.5 
in match_chan ft1= c0510gc.log.tsy1.ntup nt1= 14 st1= bu tt= 1
set scale tsys1 [2] min max 48.5 152.0
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 52.9 ymax 174.2