Starting generation of Calibration File 
FS version = 0009.0004.0013 
time_zero = 24130800 
Rack type is MK3/4
Found #22 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #11 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #7 errors of type = ERROR ch -370 Total power integrator overflow on IF3 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR rl -106 Transport(s) in illegal state for this operation 
Found #2 errors of type = ERROR rz  -33 E-C STAT_UICVERFAIL: UI verifier shows failure condition. In C1TEST mode \nthis indicates C1 cable connection fault.\n 
Found #1 errors of type = ERROR an   -4 Interface not set to remote. 
Found #1 errors of type = ERROR rl  -30 Tape motion state is invalid for requested operation 
Found #1 errors of type = ERROR ch -510 Recorder state does not agree with request. 
Found #1 errors of type = ERROR rz  -33 occurred a total of 2 times  but has now stopped 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= syw013hh.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 43.0 102.2
set scale tsys2 [2] min max 45.8 72.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 40 ymax 109.7 
in match_chan ft1= syw013hh.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 43.0 102.2
set scale tsys2 [2] min max 45.8 72.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 28.4 ymax 95.8 
in match_chan ft1= syw013hh.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 43.0 102.2
set scale tsys2 [2] min max 45.8 72.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 40.8 ymax 77.1