Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 6937200 
Rack type is MK3/4
Found #66 errors of type = ERROR ch -370 Total power integrator overflow on IF3 
Found #14 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #5 errors of type = ERROR qk -211 Tsys value for device i3 overflowed or were less than zero. 
Found #2 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR ch -301 v1 module is not in remote 
Found #1 errors of type = ERROR sd -201 PHASE must be ON or OFF. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= syw009hh.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 47.6 305
set scale tsys2 [2] min max 48.2 79.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 44.8 ymax 305 
in match_chan ft1= syw009hh.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 47.6 305
set scale tsys2 [2] min max 48.2 79.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 33.2 ymax 305 
in match_chan ft1= syw009hh.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 47.6 305
set scale tsys2 [2] min max 48.2 79.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.2 ymax 84.9