Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 13863600 
Rack type is VLBA
Found #21 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #9 errors of type = ERROR ch -208 bc gain mode does not check with requested setting 
Found #7 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #4 errors of type = ERROR ib -402 GPIB(enol) write handshake error  CHECK instrument and cable  W1 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR sp   -3 More than 12 characters in function or procedure name. 
Found #1 errors of type = ERROR bo -105 Error opening schedule file FMP  FFF 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR mc   -2 Interface bb responded  but did not ACKnowledge. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 12.75 max= 26.67
RX2 min= 41.69 max= 47.68
RX3 min= 43.28 max= 48.16
Plotting 3 Tsys channels: 02 06 11
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= sur001gc.log.tsy1.ntup nt1= 7 st1= 2u tt= 1
set scale tsys1 [2] min max 60.0 94.2
set scale tsys2 [2] min max 66.4 370.3
set scale tsys3 [2] min max  
 Tsys scale ymin 64.2 ymax 100 
in match_chan ft1= sur001gc.log.tsy1.ntup nt1= 11 st1= 6u tt= 1
set scale tsys1 [2] min max 60.0 94.2
set scale tsys2 [2] min max 66.4 370.3
set scale tsys3 [2] min max  
 Tsys scale ymin 57.0 ymax 73.7 
in match_chan ft1= sur001gc.log.tsy2.ntup nt1= 8 st1= 11u tt= 2
set scale tsys1 [2] min max 60.0 94.2
set scale tsys2 [2] min max 66.4 370.3
set scale tsys3 [2] min max  
 Tsys scale ymin 66.4 ymax 100