Starting generation of Calibration File 
FS version = 0009.0004.0015 
time_zero = 29325600 
Rack type is VLBA
Rack type is VLBA
Rack type is VLBA
Found #205 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #205 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #79 errors of type = ERROR st   -7 Antenna off-source! 
Found #61 errors of type = ERROR ch -201 hd communication trouble 
Found #61 errors of type = ERROR ch -201 rc communication trouble 
Found #61 errors of type = ERROR ch   -1 Trouble with class buffer in CHEKR 
Found #15 errors of type = ERROR qg -303 Track 33 parity errors exceed threshold. 
Found #10 errors of type = ERROR mc   -1 Interface rc timed-out. 
Found #9 errors of type = ERROR qk -211 Tsys value for device bu overflowed or were less than zero. 
Found #9 errors of type = ERROR qk -211 Tsys value for device cu overflowed or were less than zero. 
Found #7 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track 32 parity errors exceed threshold. 
Found #4 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found #4 errors of type = ERROR qk -211 Tsys value for device ic overflowed or were less than zero. 
Found #3 errors of type = ERROR vb -102 No default for IF source. 
Found #3 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. 
Found #2 errors of type = ERROR ch -233 rc tape drive should be moving and it isn't 
Found #2 errors of type = ERROR st   -5 Error return from antenna. 
Found #2 errors of type = ERROR qg -303 Track 29 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 24 parity errors exceed threshold. 
Found #2 errors of type = ERROR ma   -4 Device wx timed-out on response. 
Found #2 errors of type = ERROR ma   -4 Device xx timed-out on response. 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR qg -306 No tracks selected  was command set-up 
Found #1 errors of type = ERROR ib   -4 GPIB Device time-out on response ca 
Found #1 errors of type = ERROR qg -304 Track 33 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ia overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device eu overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -303 Track  2 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -304 Track  2 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  8 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -304 Track  3 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found these BBCs: bbc06 bbc11 bbc06
NBBC: 3
Found these SX parameters: slo xlo sup
RX1 min= 3.85 max= 2000.339.10:52:24.50
RX2 min= 4.66 max= 4.68
RX3 min= 265.27 max= 303.86
Plotting 3 Tsys channels: 06 11 06
Tsysa values are: 1 2 3 etc
Tsysb values are:  10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= rdv24kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 34.2 40.3
set scale tsys2 [2] min max 305 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 28 ymax 44.6 
in match_chan ft1= rdv24kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 34.2 40.3
set scale tsys2 [2] min max 305 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 300 ymax 305 
in match_chan ft1= rdv24kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 34.2 40.3
set scale tsys2 [2] min max 305 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 28 ymax 44.6