Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 2714400 
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Found #167 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #46 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found #22 errors of type = ERROR ma -811 MK4 FM A D converter vs. mode conflict 
Found #12 errors of type = ERROR ma   -4 Device tp timed-out on response. 
Found #6 errors of type = ERROR ma   -4 Device hd timed-out on response. 
Found #4 errors of type = ERROR ch -309 v1 alarm is on 
Found #3 errors of type = ERROR ch -334 Tape should be moving and it's stopped 
Found #3 errors of type = ERROR ch -201 hd communication trouble 
Found #3 errors of type = ERROR qg -303 Track 32 parity errors exceed threshold. 
Found #3 errors of type = ERROR ch   -4 Device tp timed-out on response from MATCN 
Found #2 errors of type = ERROR qk -211 Tsys value for device vc overflowed or were less than zero. 
Found #2 errors of type = ERROR qk -211 Tsys value for device vb overflowed or were less than zero. 
Found #2 errors of type = ERROR sc   -2 setcl: formatter time out-of-range 
Found #2 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #2 errors of type = ERROR qk -211 Tsys value for device v2 overflowed or were less than zero. 
Found #2 errors of type = ERROR ch -345 Tape drive alarm is on 
Found #2 errors of type = ERROR qk -211 Tsys value for device v7 overflowed or were less than zero. 
Found #2 errors of type = ERROR ch -317 Total power integrator overflow on IF2 
Found #2 errors of type = ERROR qk -211 Tsys value for device v8 overflowed or were less than zero. 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR qk -211 Tsys value for device v1 overflowed or were less than zero. 
Found #2 errors of type = ERROR qg -303 Track 33 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 28 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  6 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found #1 errors of type = ERROR bo -133 Error opening procedure library 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 29.97 max= 2000.031.10:31:18.21
RX2 min= 46.94 max= 47.31
RX3 min= 2.500 max= 2.500
Can't plot RX3
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= rdv19wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 64.3 163.8
set scale tsys2 [2] min max 36.3 141.0
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 57.9 ymax 173.5 
in match_chan ft1= rdv19wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 64.3 163.8
set scale tsys2 [2] min max 36.3 141.0
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 59 ymax 154.6 
in match_chan ft1= rdv19wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 64.3 163.8
set scale tsys2 [2] min max 36.3 141.0
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 31.3 ymax 146