Starting generation of Calibration File 
FS version = 0009.0004.0017 
time_zero = 28832400 
Rack type is MK3/4
Found #3784 errors of type = ERROR st   -4 Interface not set to remote. 
Found #498 errors of type = ERROR st   -7 Antenna off-source! 
Found #486 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #486 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #111 errors of type = ERROR st   -2 Antenna timed out. 
Found #87 errors of type = ERROR st   -6 Antenna control restored. 
Found #40 errors of type = ERROR ch   -4 Device v2 timed-out on response from MATCN 
Found #32 errors of type = ERROR ma   -4 Device v2 timed-out on response. 
Found #12 errors of type = ERROR an   -7 Antenna communications restored. 
Found #5 errors of type = ERROR qk -211 Tsys value for device ve overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device vb overflowed or were less than zero. 
Found #4 errors of type = ERROR qk -211 Tsys value for device va overflowed or were less than zero. 
Found #4 errors of type = ERROR qk -211 Tsys value for device vd overflowed or were less than zero. 
Found #4 errors of type = ERROR qk -211 Tsys value for device vc overflowed or were less than zero. 
Found #3 errors of type = ERROR qk -211 Tsys value for device v9 overflowed or were less than zero. 
Found #2 errors of type = ERROR ch -309 vb alarm is on 
Found #2 errors of type = ERROR ch -309 v8 alarm is on 
Found #2 errors of type = ERROR qg -303 Track  4 parity errors exceed threshold. 
Found #2 errors of type = ERROR ch -334 Tape should be moving and it's stopped 
Found #2 errors of type = ERROR ch -309 v7 alarm is on 
Found #1 errors of type = ERROR ch   -4 Device v4 timed-out on response from MATCN 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 24. 
Found #1 errors of type = ERROR ch   -4 Device v5 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch   -4 Device v3 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch   -4 Device v1 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch   -4 Device v7 timed-out on response from MATCN 
Found #1 errors of type = ERROR ch   -4 Device v6 timed-out on response from MATCN 
Found #1 errors of type = ERROR st   -3 Antenna response garbled. 
Found #1 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these SK parameters: 00(BXFNT) 02(LO_TMP) 03(DCAL_T)
RX1 min= 21.70 max= 2000.333.17:58:44.81
RX2 min= 47.40 max= 47.50
RX3 min= 45.00 max= 45.20
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are: 5 6 etc
NTSYS: 3
in match_chan ft1= na396ny.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 54.1 305
set scale tsys2 [2] min max 34.4 305
set scale tsys3 [2] min max 46.3 289.9
set scale tsys4 [2] min max  
 Tsys scale ymin 53.1 ymax 305 
in match_chan ft1= na396ny.log.tsy3.ntup nt1= 8 st1= v6 tt= 3
set scale tsys1 [2] min max 54.1 305
set scale tsys2 [2] min max 34.4 305
set scale tsys3 [2] min max 46.3 289.9
set scale tsys4 [2] min max  
 Tsys scale ymin 43.1 ymax 277.7 
in match_chan ft1= na396ny.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 54.1 305
set scale tsys2 [2] min max 34.4 305
set scale tsys3 [2] min max 46.3 289.9
set scale tsys4 [2] min max  
 Tsys scale ymin 29.4 ymax 305