Starting generation of Calibration File 
FS version = 0009.0004.0013 
time_zero = 28832400 
Rack type is MK3/4
Found #63 errors of type = ERROR AN -103 Pointing computer tracking errors are too large.
 
Found #63 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING!
 
Found #42 errors of type = ERROR qg -305 AUX data differs from expected value on track 11.
 
Found #42 errors of type = ERROR qg -304 Track 11 sync errors exceed threshold.
 
Found #42 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold.
 
Found #26 errors of type = ERROR qk -211 Tsys value for device ve overflowed or were less than zero.
 
Found #19 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold.
 
Found #18 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold.
 
Found #14 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold.
 
Found #13 errors of type = ERROR qg -303 Track 23 parity errors exceed threshold.
 
Found #13 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold.
 
Found #11 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold.
 
Found #11 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold.
 
Found #10 errors of type = ERROR ST   -3 Antenna communications restored.
 
Found #10 errors of type = ERROR ST   -2 Antenna communications failed.
 
Found #9 errors of type = ERROR qd -301 Synch block CRC checksum test FAILED.
 
Found #9 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold.
 
Found #8 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold.
 
Found #8 errors of type = ERROR ST   -9 Antenna is in MANUAL mode.
 
Found #8 errors of type = ERROR qg -303 Track 21 parity errors exceed threshold.
 
Found #7 errors of type = ERROR qg -303 Track  1 parity errors exceed threshold.
 
Found #5 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold.
 
Found #5 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold.
 
Found #3 errors of type = ERROR qg -305 AUX data differs from expected value on track 15.
 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track  3.
 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track  7.
 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track 23.
 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 25.
 
Found #1 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero.
 
Found #1 errors of type = ERROR ST   -6 Antenna brakes are ON.
 
Found #1 errors of type = ERROR qk -211 Tsys value for device vd overflowed or were less than zero.
 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 21.
 
Found these BBCs: vc02
 vc06
 vc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 21.30
 max= 2000.333.17:41:52.97
RX2 min= 45.60
 max= 46.21
RX3 min= 45.72
 max= 46.09
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na396ap.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 52.6 80.1
set scale tsys2 [2] min max 65.8 125.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 48.7 ymax 85.8 
in match_chan ft1= na396ap.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 52.6 80.1
set scale tsys2 [2] min max 65.8 125.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 37.4 ymax 71.6 
in match_chan ft1= na396ap.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 52.6 80.1
set scale tsys2 [2] min max 65.8 125.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 60.8 ymax 130.1