Starting generation of Calibration File 
FS version = 0009.0004.0015 
time_zero = 28227600 
Rack type is VLBA
Found #9 errors of type = ERROR mc   -1 Interface rc timed-out. 
Found #8 errors of type = ERROR st   -4 Interface not set to remote. 
Found #7 errors of type = ERROR ch -238 rc low tape sensor doesn't match commanded 
Found #5 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #5 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #4 errors of type = ERROR st   -6 Antenna control restored. 
Found #4 errors of type = ERROR ch -233 rc tape drive should be moving and it isn't 
Found #3 errors of type = ERROR ch -232 rc group enables do not match commanded enable 
Found #3 errors of type = ERROR ch -234 rc commanded speed and actual speed differ 
Found #3 errors of type = ERROR ch -201 rc communication trouble 
Found #3 errors of type = ERROR ch -201 hd communication trouble 
Found #3 errors of type = ERROR ch   -1 Trouble with class buffer in CHEKR 
Found #2 errors of type = ERROR mc   -5 Interface fm failed to handshake on monitor. 
Found #2 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  8 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 18 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 26 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 10 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -7 Antenna off-source! 
Found #1 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 31 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface b2 responded  but did not ACKnowledge. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.85 max= 2000.326.17:48:55.84
RX2 min= 4.66 max= 4.68
RX3 min= 271.62 max= 281.39
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na395kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 33.6 52.9
set scale tsys2 [2] min max 36.7 56.4
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.7 ymax 49.6 
in match_chan ft1= na395kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 33.6 52.9
set scale tsys2 [2] min max 36.7 56.4
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 31.7 ymax 61.4