Starting generation of Calibration File 
FS version = 0009.0004.0013 
time_zero = 28227600 
Rack type is MK3/4
Found #52 errors of type = ERROR qk -211 Tsys value for device ve overflowed or were less than zero. 
Found #43 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #43 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #42 errors of type = ERROR qg -304 Track 11 sync errors exceed threshold. 
Found #42 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #42 errors of type = ERROR qg -305 AUX data differs from expected value on track 11. 
Found #22 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. 
Found #19 errors of type = ERROR qg -303 Track 23 parity errors exceed threshold. 
Found #16 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #16 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #15 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #14 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #14 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #12 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #12 errors of type = ERROR qg -303 Track 21 parity errors exceed threshold. 
Found #11 errors of type = ERROR qg -303 Track  1 parity errors exceed threshold. 
Found #11 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found #9 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold. 
Found #5 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #3 errors of type = ERROR qg -305 AUX data differs from expected value on track 19. 
Found #3 errors of type = ERROR qg -305 AUX data differs from expected value on track 23. 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track  3. 
Found #2 errors of type = ERROR ST   -2 Antenna communications failed. 
Found #2 errors of type = ERROR ST   -3 Antenna communications restored. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 17. 
Found #1 errors of type = ERROR qk -211 Tsys value for device vd overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track  9. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 15. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 18.62 max= 2000.326.17:21:41.97
RX2 min= 45.23 max= 45.72
RX3 min= 42.30 max= 45.72
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na395ap.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 50.5 81.3
set scale tsys2 [2] min max 63.0 116.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 46.9 ymax 78.7 
in match_chan ft1= na395ap.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 50.5 81.3
set scale tsys2 [2] min max 63.0 116.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 35.6 ymax 69.1 
in match_chan ft1= na395ap.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 50.5 81.3
set scale tsys2 [2] min max 63.0 116.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 58 ymax 121.3