Starting generation of Calibration File 
FS version = 0009.0004.0015 
time_zero = 27622800 
Rack type is VLBA
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 28 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR qk -211 Tsys value for device eu overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -303 Track 30 parity errors exceed threshold. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.85 max= 2000.319.17:49:47.94
RX2 min= 4.67 max= 4.68
RX3 min= 266.73 max= 274.55
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na394kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 33.3 49.2
set scale tsys2 [2] min max 36.3 258.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.3 ymax 45.9 
in match_chan ft1= na394kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 33.3 49.2
set scale tsys2 [2] min max 36.3 258.1
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 31.3 ymax 263.1