Starting generation of Calibration File 
FS version = 0009.0004.0015 
time_zero = 26413200 
Rack type is MK3/4
Found #5 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR ST   -4 Error in antenna communication 
Found #1 errors of type = ERROR ch -309 v8 alarm is on 
Found #1 errors of type = ERROR sc   -2 setcl: formatter time out-of-range 
Found #1 errors of type = ERROR ch -301 v8 module is not in remote 
Found #1 errors of type = ERROR qk -211 Tsys value for device ve overflowed or were less than zero. 
Found #1 errors of type = ERROR qv -203 TPI must be U  L  UL  IF  LO  or GR. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 31.31 max= 2000.305.17:25:10.14
RX2 min= 47.07 max= 47.31
RX3 min= 2.500 max= 2.500
Can't plot RX3
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na392wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 50.0 90.0
set scale tsys2 [2] min max 44.9 89.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 47.1 ymax 93 
in match_chan ft1= na392wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 50.0 90.0
set scale tsys2 [2] min max 44.9 89.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 40.7 ymax 85.1 
in match_chan ft1= na392wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 50.0 90.0
set scale tsys2 [2] min max 44.9 89.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 39.9 ymax 94.6