Starting generation of Calibration File 
FS version = 0009.0004.0014 
time_zero = 23994000 
Rack type is VLBA
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR ch -208 bc gain mode does not check with requested setting 
Found #2 errors of type = ERROR qk -211 Tsys value for device 5u overflowed or were less than zero. 
Found #2 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR qg -303 Track 28 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.78 max= 2000.277.17:34:17.82
RX2 min= 4.57 max= 4.58
RX3 min= 267.22 max= 275.04
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na388kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 34.9 51.9
set scale tsys2 [2] min max 25.7 66.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 23.6 ymax 48.8 
in match_chan ft1= na388kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 34.9 51.9
set scale tsys2 [2] min max 25.7 66.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 20.7 ymax 71.5