Starting generation of Calibration File 
FS version = 0009.0004.0014 
time_zero = 23389200 
Rack type is VLBA
Found #10 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found #8 errors of type = ERROR st   -7 Antenna off-source! 
Found #3 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR qg -303 Track 29 parity errors exceed threshold. 
Found #1 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #1 errors of type = ERROR mc   -2 Interface b6 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR ch -208 b6 gain mode does not check with requested setting 
Found #1 errors of type = ERROR mc   -2 Interface b7 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR qg -303 Track 10 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -5 Error return from antenna. 
Found #1 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.79 max= 2000.270.17:41:52.45
RX2 min= 4.58 max= 4.60
RX3 min= 258.92 max= 266.73
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na387kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 33.7 49.8
set scale tsys2 [2] min max 35.2 58.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.2 ymax 168.3 
in match_chan ft1= na387kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 33.7 49.8
set scale tsys2 [2] min max 35.2 58.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 30.2 ymax 63.3