Starting generation of Calibration File 
FS version = 0009.0004.0013 
time_zero = 21567600 
Rack type is MK3/4
Found #14 errors of type = ERROR ma   -4 Device tp timed-out on response. 
Found #14 errors of type = ERROR qd -301 Synch block CRC checksum test FAILED. 
Found #8 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found #6 errors of type = ERROR ma   -4 Device hd timed-out on response. 
Found #4 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #3 errors of type = ERROR bo -133 Error opening procedure library 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 33.02 max= 2000.249.15:54:00.37
RX2 min= 46.70 max= 47.31
RX3 min= 2.500 max= 2.500
Can't plot RX3
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na384wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 45.2 103.0
set scale tsys2 [2] min max 44.4 109.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.2 ymax 110.2 
in match_chan ft1= na384wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 45.2 103.0
set scale tsys2 [2] min max 44.4 109.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 37 ymax 100 
in match_chan ft1= na384wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 45.2 103.0
set scale tsys2 [2] min max 44.4 109.3
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 39.4 ymax 114.3