Starting generation of Calibration File 
FS version = 0009.0004.0013 
time_zero = 17341200 
Rack type is VLBA
Found #102 errors of type = ERROR ib   -4 GPIB Device time-out on response c3 
Found #9 errors of type = ERROR qk -211 Tsys value for device ia overflowed or were less than zero. 
Found #5 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #4 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #4 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #1 errors of type = ERROR mc   -2 Interface bc responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR st   -2 Commanding antenna failed too many times  giving up. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 10.92 max= 2000.200.17:12:50.04
RX2 min= 39.98 max= 47.43
RX3 min= 41.33 max= 47.68
Plotting 3 Tsys channels: 02 06 11
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= na377gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 51.8 158.0
set scale tsys2 [2] min max 60.1 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 51.3 ymax 169 
in match_chan ft1= na377gc.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 51.8 158.0
set scale tsys2 [2] min max 60.1 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 39.9 ymax 126.1 
in match_chan ft1= na377gc.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 51.8 158.0
set scale tsys2 [2] min max 60.1 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 55.1 ymax 305