Starting generation of Calibration File 
FS version = 0009.0004.0008 
time_zero = 12502800 
Rack type is VLBA
Found #45 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #45 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #17 errors of type = ERROR st   -4 Interface not set to remote. 
Found #8 errors of type = ERROR st   -7 Antenna off-source! 
Found #3 errors of type = ERROR ch -208 b4 gain mode does not check with requested setting 
Found #2 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface b4 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR vb -201 L.O. frequency must be between 500.00 MHz and 999.99 MHz. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR st   -6 Antenna control restored. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.82 max= 2000.144.17:24:06.04
RX2 min= 4.62 max= 4.64
RX3 min= 258.92 max= 268.20
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na369kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 34.2 50.4
set scale tsys2 [2] min max 35.1 55.0
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.6 ymax 46.6 
in match_chan ft1= na369kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 34.2 50.4
set scale tsys2 [2] min max 35.1 55.0
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 30.1 ymax 60