Starting generation of Calibration File 
FS version = 0009.0004.0008 
time_zero = 11779200 
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Found #27 errors of type = ERROR ST   -4 Error in antenna communication 
Found #25 errors of type = ERROR qd -301 Synch block CRC checksum test FAILED. 
Found #22 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #16 errors of type = ERROR ma   -4 Device tp timed-out on response. 
Found #11 errors of type = ERROR ch -345 Tape drive alarm is on 
Found #6 errors of type = ERROR ch   -4 Device tp timed-out on response from MATCN 
Found #6 errors of type = ERROR ch -341 Reproduce track B does not check with request 
Found #6 errors of type = ERROR ch -340 Reproduce track A does not check with request 
Found #6 errors of type = ERROR ch -338 Reproduce equalizer does not check with request 
Found #4 errors of type = ERROR ma   -4 Device hd timed-out on response. 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #2 errors of type = ERROR ma   -4 Device fm timed-out on response. 
Found #2 errors of type = ERROR ch -346 Record enable is in the wrong state. 
Found #2 errors of type = ERROR ch -343 Tape rate generator does not agree with request. 
Found #2 errors of type = ERROR ch -334 Tape should be moving and it's stopped 
Found #1 errors of type = ERROR qg -303 Track 28 parity errors exceed threshold. 
Found #1 errors of type = ERROR ma   -4 Device v1 timed-out on response. 
Found #1 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR ma   -4 Device v6 timed-out on response. 
Found #1 errors of type = ERROR ch -309 v7 alarm is on 
Found #1 errors of type = ERROR ch -309 v8 alarm is on 
Found #1 errors of type = ERROR ma   -4 Device vb timed-out on response. 
Found #1 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found #1 errors of type = ERROR qu -302 Tape is within 100 feet of requested position. 
Found #1 errors of type = ERROR ma   -4 Device v9 timed-out on response. 
Found #1 errors of type = ERROR ma   -4 Device if timed-out on response. 
Found #1 errors of type = ERROR ma   -4 Device i3 timed-out on response. 
Found #1 errors of type = ERROR ch   -4 Device v1 timed-out on response from MATCN 
Found #1 errors of type = ERROR qk -211 Tsys value for device vb overflowed or were less than zero. 
Found #1 errors of type = ERROR sp   -3 More than 12 characters in function or procedure name. 
Found #1 errors of type = ERROR qg -303 Track 30 parity errors exceed threshold. 
Found #1 errors of type = ERROR ch -309 vb alarm is on 
Found #1 errors of type = ERROR ma   -4 Device v2 timed-out on response. 
Found #1 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 36.44 max= 2000.136.08:15:34.47
RX2 min= 47.92 max= 48.90
RX3 min= 2.500 max= 2.500
Can't plot RX3
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na368wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 58.0 203.9
set scale tsys2 [2] min max -5 107.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 55.6 ymax 211.1 
in match_chan ft1= na368wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 58.0 203.9
set scale tsys2 [2] min max -5 107.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 49.2 ymax 194.9 
in match_chan ft1= na368wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 58.0 203.9
set scale tsys2 [2] min max -5 107.9
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin -5 ymax 112.9