Starting generation of Calibration File 
FS version = 0009.0004.0005 
time_zero = 7059600 
Rack type is VLBA
Found #34 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #34 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #15 errors of type = ERROR st   -7 Antenna off-source! 
Found #14 errors of type = ERROR st   -4 Interface not set to remote. 
Found #4 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #3 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 18 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 10 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device eu overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -5 Error return from antenna. 
Found #1 errors of type = ERROR st   -6 Antenna control restored. 
Found #1 errors of type = ERROR qg -303 Track 24 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface b5 responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR qg -303 Track  8 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device au overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device bu overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device cu overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device du overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device 9u overflowed or were less than zero. 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.82 max= 2000.081.17:45:12.93
RX2 min= 4.62 max= 4.63
RX3 min= 260.87 max= 269.66
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na360kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 33.7 57.8
set scale tsys2 [2] min max -5 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.3 ymax 51.9 
in match_chan ft1= na360kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 33.7 57.8
set scale tsys2 [2] min max -5 305
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin -5 ymax 305