Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 4608000 
Rack type is MK3/4
Rack type is MK3/4
Found #21 errors of type = ERROR qd -301 Synch block CRC checksum test FAILED. 
Found #10 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #5 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found #4 errors of type = ERROR ma   -4 Device tp timed-out on response. 
Found #3 errors of type = ERROR ST   -4 Error in antenna communication 
Found #2 errors of type = ERROR ma   -4 Device hd timed-out on response. 
Found #1 errors of type = ERROR ch -201 hd communication trouble 
Found #1 errors of type = ERROR q< -301 Vacuum is not ready. 
Found #1 errors of type = ERROR qg -303 Track  6 parity errors exceed threshold. 
Found #1 errors of type = ERROR ch -317 Total power integrator overflow on IF2 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 28.26 max= 2000.053.08:12:36.12
RX2 min= 46.58 max= 47.07
RX3 min= 2.500 max= 2.500
Can't plot RX3
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na356wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 60.5 179.8
set scale tsys2 [2] min max 48.0 93.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 56.5 ymax 183 
in match_chan ft1= na356wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 60.5 179.8
set scale tsys2 [2] min max 48.0 93.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 50.6 ymax 167.1 
in match_chan ft1= na356wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 60.5 179.8
set scale tsys2 [2] min max 48.0 93.6
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43 ymax 98.6