Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 2826000 
Rack type is VLBA
Found #13 errors of type = ERROR qk -211 Tsys value for device ia overflowed or were less than zero. 
Found #7 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #4 errors of type = ERROR ch -208 ba gain mode does not check with requested setting 
Found #1 errors of type = ERROR mc   -2 Interface ba responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR qg -303 Track 30 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #1 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 18.01 max= 2000.032.17:21:01.62
RX2 min= 46.94 max= 47.68
RX3 min= 47.19 max= 48.16
Plotting 3 Tsys channels: 02 06 11
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= na353gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 54.9 119.7
set scale tsys2 [2] min max 40.4 67.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 52.4 ymax 130 
in match_chan ft1= na353gc.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 54.9 119.7
set scale tsys2 [2] min max 40.4 67.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 38.1 ymax 98 
in match_chan ft1= na353gc.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 54.9 119.7
set scale tsys2 [2] min max 40.4 67.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 35.4 ymax 72.5