Starting generation of Calibration File FS version = 0009.0004.0005 time_zero = 2221200 Rack type is VLBA Found #39 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! Found #39 errors of type = ERROR an -103 Pointing computer tracking errors are too large. Found #17 errors of type = ERROR st -4 Interface not set to remote. Found #5 errors of type = ERROR st -7 Antenna off-source! Found #3 errors of type = ERROR sp -4 Unrecognized name (not a function or procedure). Found #2 errors of type = ERROR st -6 Antenna control restored. Found #2 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. Found #2 errors of type = ERROR qg -303 Track 7 parity errors exceed threshold. Found #1 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. Found #1 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. Found #1 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. Found #1 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold. Found #1 errors of type = ERROR mc -2 Interface b9 responded but did not ACKnowledge. Found #1 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold. Found #1 errors of type = ERROR ch -233 rc tape drive should be moving and it isn't Found these BBCs: bbc06 bbc11 NBBC: 2 Found these SX parameters: slo xlo sup RX1 min= 3.81 max= 2000.025.17:45:46.58 RX2 min= 4.61 max= 4.62 RX3 min= 269.66 max= 279.43 Plotting 2 Tsys channels: 06 11 Tsysa values are: 1 2 3 etc Tsysb values are: 9 10 11 etc Tsysc values are: etc Tsysd values are: etc NTSYS: 2 in match_chan ft1= na352kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1 set scale tsys1 [2] min max 33.7 93.2 set scale tsys2 [2] min max 33.3 69.0 set scale tsys3 [2] min max set scale tsys4 [2] min max Tsys scale ymin 22.2 ymax 81.2 in match_chan ft1= na352kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2 set scale tsys1 [2] min max 33.7 93.2 set scale tsys2 [2] min max 33.3 69.0 set scale tsys3 [2] min max set scale tsys4 [2] min max Tsys scale ymin 28.3 ymax 74