Starting generation of Calibration File 
FS version = 0009.0004.0005 
time_zero = 1011600 
Rack type is VLBA
Found #29 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #29 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #8 errors of type = ERROR qg -303 Track 31 parity errors exceed threshold. 
Found #5 errors of type = ERROR qg -304 Track 31 sync errors exceed threshold. 
Found #4 errors of type = ERROR st   -7 Antenna off-source! 
Found #3 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #3 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR ch -233 rc tape drive should be moving and it isn't 
Found #1 errors of type = ERROR mc   -2 Interface ba responded  but did not ACKnowledge. 
Found #1 errors of type = ERROR ch -208 ba gain mode does not check with requested setting 
Found these BBCs: bbc06 bbc11 
NBBC: 2
Found these SX parameters: slo xlo sup
RX1 min= 3.81 max= 2000.011.17:52:56.60
RX2 min= 4.62 max= 4.63
RX3 min= 264.29 max= 272.11
Plotting 2 Tsys channels: 06 11 
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 2
in match_chan ft1= na350kk.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 34.1 49.3
set scale tsys2 [2] min max 32.5 65.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.5 ymax 45.3 
in match_chan ft1= na350kk.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 34.1 49.3
set scale tsys2 [2] min max 32.5 65.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 27.5 ymax 70.7