Starting generation of Calibration File 
FS version = 0009.0004.0001 
time_zero = 406800 
Rack type is VLBA
Found #38 errors of type = ERROR qk -211 Tsys value for device ia overflowed or were less than zero. 
Found #8 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #2 errors of type = ERROR an -102 Pointing computer command angles are incorrect. 
Found #1 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR mc   -2 Interface ia responded  but did not ACKnowledge. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 13.12 max= 2000.004.17:16:59.09
RX2 min= 42.18 max= 45.97
RX3 min= 42.43 max= 47.07
Plotting 3 Tsys channels: 02 06 11
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= na349gc.log.tsy1.ntup nt1= 8 st1= 2u tt= 1
set scale tsys1 [2] min max 52.3 125.1
set scale tsys2 [2] min max 39.8 79.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 49.8 ymax 135.5 
in match_chan ft1= na349gc.log.tsy1.ntup nt1= 12 st1= 6u tt= 1
set scale tsys1 [2] min max 52.3 125.1
set scale tsys2 [2] min max 39.8 79.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 36.8 ymax 103.6 
in match_chan ft1= na349gc.log.tsy2.ntup nt1= 9 st1= 11u tt= 2
set scale tsys1 [2] min max 52.3 125.1
set scale tsys2 [2] min max 39.8 79.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 34.8 ymax 84.7