Starting generation of Calibration File 
FS version = 0009.0004.0005 
time_zero = 11383200 
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Found #78 errors of type = ERROR qk -211 Tsys value for device v9 overflowed or were less than zero. 
Found #30 errors of type = ERROR ch -350 The Receiver 20K stage is hotter than  35K. 
Found #12 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #12 errors of type = ERROR qg -305 AUX data differs from expected value on track  5. 
Found #11 errors of type = ERROR ch -336 Enabled tracks do not check with requested tracks 
Found #5 errors of type = ERROR qk -211 Tsys value for device vc overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device i3 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device vd overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device i1 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device vb overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device va overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device ve overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v8 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v7 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v6 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v5 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v4 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v1 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v2 overflowed or were less than zero. 
Found #5 errors of type = ERROR qk -211 Tsys value for device v3 overflowed or were less than zero. 
Found #3 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #3 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track  1. 
Found #2 errors of type = ERROR qg -303 Track  1 parity errors exceed threshold. 
Found #1 errors of type = ERROR ch -309 v4 alarm is on 
Found #1 errors of type = ERROR qg -315 Bandwidth must be set with repro command first. 
Found #1 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track  3. 
Found #1 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -304 Track  1 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -306 No tracks selected  was command set-up 
Found these BBCs: vc06 vc11 vc06
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 43.65 max= 45.97
RX2 min= 36.93 max= 97.00
RX3 min= 0.130 max= 0.136
Plotting 3 Tsys channels: 06 11 06
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= cb701ft.log.tsy1.ntup nt1= 11 st1= v6 tt= 1
set scale tsys1 [2] min max 98.8 130.0
set scale tsys2 [2] min max 251.7 279.3
set scale tsys3 [2] min max  
 Tsys scale ymin 80.5 ymax 100 
in match_chan ft1= cb701ft.log.tsy2.ntup nt1= 8 st1= v11 tt= 2
set scale tsys1 [2] min max 98.8 130.0
set scale tsys2 [2] min max 251.7 279.3
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100 
in match_chan ft1= cb701ft.log.tsy1.ntup nt1= 11 st1= v6 tt= 1
set scale tsys1 [2] min max 98.8 130.0
set scale tsys2 [2] min max 251.7 279.3
set scale tsys3 [2] min max  
 Tsys scale ymin 80.5 ymax 100