Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 15526800 
Rack type is MK3/4
Found #79 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #20 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #20 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #15 errors of type = ERROR ST   -2 Antenna communications failed. 
Found #15 errors of type = ERROR ST   -3 Antenna communications restored. 
Found #13 errors of type = ERROR ch -352 Tape head 2 is not in requested position. 
Found #13 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #12 errors of type = ERROR ST   -6 Antenna brakes are ON. 
Found #10 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #10 errors of type = ERROR qg -303 Track  1 parity errors exceed threshold. 
Found #9 errors of type = ERROR qg -303 Track 23 parity errors exceed threshold. 
Found #9 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #9 errors of type = ERROR qd -301 Synch block CRC checksum test FAILED. 
Found #8 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #8 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track 21 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #5 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #3 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold. 
Found #2 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 15. 
Found #1 errors of type = ERROR qg -304 Track 17 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 25. 
Found #1 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -304 Track 19 sync errors exceed threshold. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track  3. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 24.35 max= 2000.179.17:11:41.32
RX2 min= 46.09 max= 47.19
RX3 min= 42.43 max= 46.09
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= ca084ap.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 47.8 90.8
set scale tsys2 [2] min max 48.7 106.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.4 ymax 92.8 
in match_chan ft1= ca084ap.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 47.8 90.8
set scale tsys2 [2] min max 48.7 106.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 34.3 ymax 80.5 
in match_chan ft1= ca084ap.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 47.8 90.8
set scale tsys2 [2] min max 48.7 106.7
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 43.7 ymax 111.7