Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 19926000 
Rack type is MK3/4
Found #27 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #27 errors of type = ERROR qg -305 AUX data differs from expected value on track 11. 
Found #25 errors of type = ERROR qg -304 Track 11 sync errors exceed threshold. 
Found #24 errors of type = ERROR ST   -9 Antenna is in MANUAL mode. 
Found #12 errors of type = ERROR qg -303 Track 25 parity errors exceed threshold. 
Found #11 errors of type = ERROR qg -303 Track 23 parity errors exceed threshold. 
Found #9 errors of type = ERROR qg -303 Track  3 parity errors exceed threshold. 
Found #8 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #8 errors of type = ERROR qg -303 Track  1 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track 15 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track 19 parity errors exceed threshold. 
Found #7 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #6 errors of type = ERROR AN -103 Pointing computer tracking errors are too large. 
Found #6 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #5 errors of type = ERROR ST   -2 Antenna communications failed. 
Found #5 errors of type = ERROR ST   -3 Antenna communications restored. 
Found #5 errors of type = ERROR qg -303 Track 21 parity errors exceed threshold. 
Found #5 errors of type = ERROR qg -303 Track 27 parity errors exceed threshold. 
Found #3 errors of type = ERROR ST   -6 Antenna brakes are ON. 
Found #2 errors of type = ERROR qk -211 Tsys value for device vc overflowed or were less than zero. 
Found #2 errors of type = ERROR qg -305 AUX data differs from expected value on track 15. 
Found #2 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found #2 errors of type = ERROR qg -303 Track 13 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track  1. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 13. 
Found #1 errors of type = ERROR qk -211 Tsys value for device i2 overflowed or were less than zero. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track 17. 
Found #1 errors of type = ERROR qg -305 AUX data differs from expected value on track  3. 
Found #1 errors of type = ERROR qg -303 Track 17 parity errors exceed threshold. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 23.62 max= 2000.230.15:32:58.14
RX2 min= 45.97 max= 46.82
RX3 min= 41.94 max= 45.97
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= bf43cap.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 52.8 75.7
set scale tsys2 [2] min max 71.0 87.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 49.3 ymax 80.9 
in match_chan ft1= bf43cap.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 52.8 75.7
set scale tsys2 [2] min max 71.0 87.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 42.5 ymax 72.9 
in match_chan ft1= bf43cap.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 52.8 75.7
set scale tsys2 [2] min max 71.0 87.5
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 66 ymax 92.5